HEAVY DUTY ANTI-RUST PENETRANT
QP 019 Heavy Duty Anti Rust Penetrant is a blended formulation with double strength metal conditioner and anti-rust ability. QP 019 is an excellent penetrant for loosening rusty nuts and bolts. Excellent long lasting anti-rust protective film for mould protection. It displaces moisture and seals parts from oxidation. Can be used as tapping oil. Excellent for tap and die tools maintenance. QP 019 can be mixed into greases to improve the quality of greases used. Its excellent anti-weld property reduces friction, heat and wear & tear of parts in contact.



Solvent used for QP 019 is of high purity, mild odour, low skin irritation, superior spreadibility & improved di-electric properties.


FDA & EPA REGULATIONS:

• EPA 40 CFR 180.1001 (c) & (e)

• FDA 21 CFR 172.882

• FDA 21 CFR 172.884

• FDA 21 CFR 178.3530

• FDA 21 CFR 178.3650

• FDA 21 CFR 573.680

AS A PENETRANT
Apply to affected area. Tap area lightly for stubborn rust of nuts and bolts. Tighten ¼ turn followed by loosening action.

RUST PROTECTION
Spray with QP 019 directly onto metal surfaces.

AS A TAPPING OIL
Spray liberally tapping tool & Die with QP 019 and apply directly to metal surfaces.

AS A WATER DISPLACER
Spray affected parts to displace and seal off moisture.

AS A LUBRICANT
Spray liberally onto moving parts or joints

Note: For places where greases are recommended, use Q Plus QP101 Spray Grease.

< Back   |   Top^   |   Next >